I have a problem with the Blue Box I have. I bought two (they were supposed to be NOS)and tried to put it on my beetle. The flashers don't work without a separate turn signal relay and the E-flasher does not work at all. Could someone tell me how to put it all together. It dosn't seem to have all the wires either for all the pins on it. I have it in storage now but will try to get a picture of it to upload so you can see what I'm dealing with. It is still a 6 volt system
Blue Box
- jmartini
- Administrator
- Posts: 1316
- Joined: Fri Dec 23, 2005 8:43 pm
- Location: Nevada, Texas
- Contact:
Hi Meyers72 and Welcome to the forum! If it is still a six volt it should have 9 pins. There should be a wire to every pin which is probably where your issue lies. Mine is curretnly in storage or I'd send a picture. We have some folks on the forum that should be able to help you and maybe one can get a picture attached.
Last edited by jmartini on Fri Jan 09, 2009 3:47 am, edited 1 time in total.
- elkluvadore
- Senior Member
- Posts: 142
- Joined: Tue Dec 25, 2007 6:53 pm
- Location: Berthoud Colorado
- Contact: