RobM wrote:jmartini wrote:If memory serves me correctly the hose should slip over the heater channel, Here's a link to the correct hose for the application:
http://www.wolfsburgwest.com/cart/Detai ... 113819723A
Thanks for the link. No nipple on the heater channel for the hose to slip onto. Just an empty hole. I may have to fabracate one.
- Well I thought I'd found it. I was close, but no prize.
- After removing the carpet inside and the hood, and digging and vaccuming through several inches of muck down there, I found the nipples--with bits of foil heater pipe still attached. (By the mess I cleaned out, this poor bug looks like it was at the bottom of a river or something!) They were just buried and around a corner.
- Anyway, no 'Y' s are available new so the local parts store is scavenging some for me. They should be in Sunday.
- I hooked one side vent up and got my wife to plug the hose in for the other one since my forearm just won't fit down that trunkspace. So I should have side-vent defrosters now.
Thanks for the help folks,
Rob