Hi.
What would a good fix be on the blocks oil pressure switch threads that are pulled? The switch only holds to a certain point then a sudden turn.
Thanks[/list]
Oil Pressure Switch Threads
-
- Senior Member
- Posts: 154
- Joined: Sun Sep 30, 2012 7:55 am
- Location: Beaver, PA
If my memory serves me correctly, that is a tapered tread in the case. Never tighten beyond snug.
Having said that, maybe you got lucky and stripped the threads on the oil pressure sensor and not the case.
If you did strip the threads in the case, maybe there is enough thread left to use some teflon tape to add some extra material. (teflon tape is commonly used in plumbling)
Having said that, maybe you got lucky and stripped the threads on the oil pressure sensor and not the case.
If you did strip the threads in the case, maybe there is enough thread left to use some teflon tape to add some extra material. (teflon tape is commonly used in plumbling)