Rear seat belts

Here's the place to come to post when you have questions relating to technical issues or mechanical questions on the 1966 model year.

Post Reply
bam bam
New Member
Posts: 3
Joined: Thu Sep 20, 2012 2:04 pm
Location: Sheffield

Rear seat belts

Post by bam bam »

Ok I am new to beetles and fell into owning a 66 beetle (I think I like it)I already have a bay . What I need to know is can I fit seat belts into the rear are there bolt holes in the roof lining etc to mount them............
CharlieC66
Member
Posts: 18
Joined: Tue Mar 13, 2012 4:20 pm
Location: MA

Post by CharlieC66 »

Yes, there are mounting points up above the rear window filled with a large Phillips screw plug..
My question is the lower mounts, There appear to be a set of center mounts high up under the seat back again filled with Phillips screws. As for the outside mount, there is a big bolt in the floor but it seems a bit too far inboard. What about the bolt that holds the seat-seatback? :?
bam bam
New Member
Posts: 3
Joined: Thu Sep 20, 2012 2:04 pm
Location: Sheffield

Post by bam bam »

Does anybody have a naked beetle shell that could take some pictures as I have no idea where in the roof to start please ..Thanks
fatalifeaten
Senior Member
Posts: 512
Joined: Sun Feb 03, 2008 12:05 am
Location: The 480

Post by fatalifeaten »

I can. I'll post l;ater
lilbugger
Member
Posts: 24
Joined: Wed Oct 21, 2009 11:00 am
Location: La Crescent, MN USA

Post by lilbugger »

Here ya go:
Attachments
Holes
Holes
seatbelt2.jpg (103.31 KiB) Viewed 78257 times
branston
Senior Member
Posts: 111
Joined: Fri Feb 20, 2009 4:18 pm
Location: Lock Haven, PA and St.Ives. UK

Post by branston »

lilbugger wrote:Here ya go:
Wow that's my photo of my car! must have come off Samba - but it is there to be shared of course.
Ben
Member
Posts: 10
Joined: Sun Oct 07, 2012 5:57 pm
Location: Florida

Post by Ben »

I am trying to locate the same holes. The arrows in that picture look to be pointing to where the seat back bolts to. Is that right? There seems to be a bolt the same size as a seat belt bolt that looks like it will work but it is on the floor. Please advise. Thanks.
Ben
branston
Senior Member
Posts: 111
Joined: Fri Feb 20, 2009 4:18 pm
Location: Lock Haven, PA and St.Ives. UK

Post by branston »

Ben wrote:I am trying to locate the same holes. The arrows in that picture look to be pointing to where the seat back bolts to. Is that right? There seems to be a bolt the same size as a seat belt bolt that looks like it will work but it is on the floor. Please advise. Thanks.
Ben
The seat belt holes and seat back holes are close together. I'm sure I have a photo
Ben
Member
Posts: 10
Joined: Sun Oct 07, 2012 5:57 pm
Location: Florida

Post by Ben »

Thanks, I am sure it is there. I need to go look again. Carpeting is in place, just need to peel back a little more.
Ben
parafyn
New Member
Posts: 7
Joined: Thu May 23, 2013 1:06 pm
Location: Spokane WA

Post by parafyn »

my 66 only has the seat back holes where that arrow points and it doesnt have a seat belt mount hole near it at all. im trying to put seatbelts in mine and i dont know where them outside mounts are
parafyn
New Member
Posts: 7
Joined: Thu May 23, 2013 1:06 pm
Location: Spokane WA

Post by parafyn »

i took some pics...

Image

Image
Blue Baron
Senior Member
Posts: 879
Joined: Sun Jan 18, 2009 8:34 pm
Location: Tampa, Florida

Post by Blue Baron »

Is that a rusted, broken off bolt below the mount?
parafyn
New Member
Posts: 7
Joined: Thu May 23, 2013 1:06 pm
Location: Spokane WA

Post by parafyn »

no, its some dirty foam or something not quite sure the exact material...
hercdriver
Senior Member
Posts: 154
Joined: Sun Sep 30, 2012 7:55 am
Location: Beaver, PA

Post by hercdriver »

I'm doing the rear WW seatbelts now and found this picture helpful.

Image
Post Reply