glove box latch adjustment

Here's the place to come to post when you have questions relating to technical issues or mechanical questions on the 1966 model year.

Post Reply
bill hauck
Senior Member
Posts: 100
Joined: Thu Dec 13, 2007 8:52 am

glove box latch adjustment

Post by bill hauck »

I have a hard time opening mine. Is there some way to adjust this so it opens easier???
User avatar
exprof
Senior Member
Posts: 85
Joined: Wed Mar 05, 2008 12:45 pm
Location: Iowa City, Iowa USA

Re: glove box latch adjustment

Post by exprof »

bill hauck wrote:I have a hard time opening mine. Is there some way to adjust this so it opens easier???

Check that the latch itself is not damaged in any way. If it's functioning properly, you'll have to bend the metal tab slightly to get the hook on the latch to engage the tab.
bill hauck
Senior Member
Posts: 100
Joined: Thu Dec 13, 2007 8:52 am

glove box latch

Post by bill hauck »

Thanks. I'll give it a try
bill hauck
Senior Member
Posts: 100
Joined: Thu Dec 13, 2007 8:52 am

glove box latch

Post by bill hauck »

didn't work. still need to "coax" it open with a small screwdriver. should just fall open, shouldn't it??
User avatar
exprof
Senior Member
Posts: 85
Joined: Wed Mar 05, 2008 12:45 pm
Location: Iowa City, Iowa USA

Re: glove box latch

Post by exprof »

bill hauck wrote:didn't work. still need to "coax" it open with a small screwdriver. should just fall open, shouldn't it??
Yes, it should. Sounds as if the tab is a bit too far back. You may have to "finagle" a bit to get the right adjustment. Bend it a bit more toward you if you are sitting in the passenger seat as you are doing this. Just a small bit at a time--not too much.
bill hauck
Senior Member
Posts: 100
Joined: Thu Dec 13, 2007 8:52 am

latch

Post by bill hauck »

exprof: still doesn't work. could it be the push button mechanism itself??
bill hauck
Senior Member
Posts: 100
Joined: Thu Dec 13, 2007 8:52 am

latch

Post by bill hauck »

Exprof: got it, finally. Thanks for the advice.
User avatar
exprof
Senior Member
Posts: 85
Joined: Wed Mar 05, 2008 12:45 pm
Location: Iowa City, Iowa USA

Re: latch

Post by exprof »

bill hauck wrote:Exprof: got it, finally. Thanks for the advice.

Glad to be of help.
Post Reply