I am replacing the window to body rubber seals.
They come in one piece. Are they cut to install or are they installed in one piece. The latter appears difficult if not impossible to do.
pop out windows
-
- Moderator
- Posts: 181
- Joined: Sun Oct 22, 2006 4:40 am
Please do not cut
they are installed as one solid seal.The resean for the tight fit is the backward seal motion that is created as the string is worked around the seal lip on the body....if you are also going to install metal strips that must be done while the glass is out,..,.
any other questions just email me we can talk on the phone..
mdazzo@optonline.net
they are installed as one solid seal.The resean for the tight fit is the backward seal motion that is created as the string is worked around the seal lip on the body....if you are also going to install metal strips that must be done while the glass is out,..,.
any other questions just email me we can talk on the phone..
mdazzo@optonline.net
-
- Senior Member
- Posts: 512
- Joined: Sun Feb 03, 2008 12:05 am
- Location: The 480
-
- Moderator
- Posts: 181
- Joined: Sun Oct 22, 2006 4:40 am
-
- Senior Member
- Posts: 100
- Joined: Thu Dec 13, 2007 8:52 am
pop out (not conventional rear quarter windows)
Matt, I forget: on the "pop out" windows, do I cut the rubber seal (window to body) seal to install??
-
- Moderator
- Posts: 181
- Joined: Sun Oct 22, 2006 4:40 am
- elkluvadore
- Senior Member
- Posts: 142
- Joined: Tue Dec 25, 2007 6:53 pm
- Location: Berthoud Colorado
- Contact:
-
- Moderator
- Posts: 181
- Joined: Sun Oct 22, 2006 4:40 am