Here's the place to come to post when you have questions relating to technical issues or mechanical questions on the 1966 model year.
bill hauck
Senior Member
Posts: 100 Joined: Thu Dec 13, 2007 8:52 am
Post
by bill hauck » Sat Mar 01, 2008 4:50 pm
anyone have an "easy" way to get the little plugs at the corners into the holes? can't seem to get my hands in to pull them through the holes.
jmartini
Administrator
Posts: 1316 Joined: Fri Dec 23, 2005 8:43 pm
Location: Nevada, Texas
Contact:
Post
by jmartini » Sun Mar 02, 2008 4:57 am
I applied some soap to make them slip in easier then I used a small dull metal rod to push them into place. Others might have a better way.....
volksbugusa
Moderator
Posts: 181 Joined: Sun Oct 22, 2006 4:40 am
Post
by volksbugusa » Sun Mar 02, 2008 5:01 pm
easy
spray everything down with silicone
poke the nipple thru the hole
then take a 90 degree needle nose plier and pivot the nipple downward...
cheers
volksbugusa
bill hauck
Senior Member
Posts: 100 Joined: Thu Dec 13, 2007 8:52 am
Post
by bill hauck » Mon Mar 03, 2008 8:22 am
got them in. thanks for the info. Soap worked well. Wish I had thought of the 90 degree needlenose earlier!!!!