Search found 14 matches

by CharlieC66
Sat Sep 22, 2012 9:22 am
Forum: 1966 Technical or Mechanical Forum
Topic: Rear seat belts
Replies: 13
Views: 78400

Yes, there are mounting points up above the rear window filled with a large Phillips screw plug.. My question is the lower mounts, There appear to be a set of center mounts high up under the seat back again filled with Phillips screws. As for the outside mount, there is a big bolt in the floor but i...
by CharlieC66
Tue Aug 14, 2012 7:46 am
Forum: 1966 Technical or Mechanical Forum
Topic: 6 volt replacement radio
Replies: 7
Views: 6594

I just looked on e-bay and someone is listing a Sapphire IV 6 volt AM-FM at a really high buy it now price. The only advantage over a modern radio is it's 6 volt and for the purist correct for the time. :)
by CharlieC66
Tue Aug 14, 2012 7:22 am
Forum: 1966 Technical or Mechanical Forum
Topic: 6 volt replacement radio
Replies: 7
Views: 6594

I have an offer from a friend who is into radio repair to take a look at it and see if it's an easy fix. in any case it looks good and worked fine until doused with ww fluid. Too expensive to convert a lot of stuff just for the radio. I cant sing but can live without it. :o
by CharlieC66
Sat Aug 11, 2012 7:04 am
Forum: 1966 Technical or Mechanical Forum
Topic: 6 volt replacement radio
Replies: 7
Views: 6594

6 volt replacement radio

The Sapphire 3 in my car is broken and I would like to replace it with a modern radio. I'm getting the impression that they are all 12 V and I don't want to convert the whole car to 12 V. Thoughts are to install a 12 V battery just for the radio and charge it manually as necessary. Or does someone a...
by CharlieC66
Fri Jul 06, 2012 5:54 pm
Forum: 1966 Technical or Mechanical Forum
Topic: Wheel paint
Replies: 1
Views: 1845

Wheel paint

Notice that ham handed "mechanic" had used a screwdriver to get hub cap off. Several chips on dark brown inner part of wheel. looking for source for the right color paint enough for touch up.
by CharlieC66
Fri Jun 22, 2012 11:53 am
Forum: 1966 Technical or Mechanical Forum
Topic: Local battery source
Replies: 8
Views: 4640

I guess that answers the question about it being too tall to mount standing up. :?
by CharlieC66
Thu Jun 21, 2012 12:37 pm
Forum: 1966 Technical or Mechanical Forum
Topic: Local battery source
Replies: 8
Views: 4640

That would be my first choice. What about mounting?
by CharlieC66
Thu Jun 14, 2012 5:30 pm
Forum: 1966 Technical or Mechanical Forum
Topic: Local battery source
Replies: 8
Views: 4640

Local battery source

I may need a new 6v battery. Who carries them? :(
by CharlieC66
Sun Apr 08, 2012 8:13 am
Forum: 1966 Technical or Mechanical Forum
Topic: Washer bottle, etc.
Replies: 3
Views: 4075

washer

Wow, nos sure is expensive. Filled it up yesterday, seemed to hold pressure but didn't squirt. Yes, I know that 66 didn't have the tire air hose but one should work. Just another minor problem to sort out. Thanks. :)


Charlie
by CharlieC66
Sat Apr 07, 2012 8:43 am
Forum: 1966 Technical or Mechanical Forum
Topic: Washer bottle, etc.
Replies: 3
Views: 4075

Washer bottle, etc.

Going to check out the washer bottle to see if it really holds air for at least a while. Suspect bad valve core or small crack. Two questions: Does anyone make, sell replacement jugs? Does anyone make the little hose arrangement that stole air from the spare tire. Don't think it was available on '66...
by CharlieC66
Sat Mar 24, 2012 5:30 pm
Forum: 1966 Technical or Mechanical Forum
Topic: Upper seat belt mount
Replies: 4
Views: 3814

Re: Upper seat belt mount

[quote="CharlieC66"]putting shoulder belts where there were lap belts. I brought the plastic plug down to Home Depot. looked to be 12 mm but they didn't have any bolts short enough. Hardware store trip and i may bring one of the floor bolts assuming same size. Anyone with a quick answer to...
by CharlieC66
Fri Mar 23, 2012 4:49 pm
Forum: 1966 Technical or Mechanical Forum
Topic: Upper seat belt mount
Replies: 4
Views: 3814

Upper seat belt mount

putting shoulder belts where there were lap belts. I brought the plastic plug down to Home Depot. looked to be 12 mm but they didn't have any bolts short enough. Hardware store trip and i may bring one of the floor bolts assuming same size. Anyone with a quick answer to this.
by CharlieC66
Wed Mar 14, 2012 8:16 am
Forum: 1966 Technical or Mechanical Forum
Topic: Speedo Help
Replies: 4
Views: 3119

Dead Speedo

Hi,

My recently acquired 66 Bug has a dead speedo, cable is fine. Options to find a good used one, rebuilt one or repair the one in the car. Any and all help welcome, GPS is more accurate bot not authentic to 66. :(

Charlie
by CharlieC66
Wed Mar 14, 2012 5:46 am
Forum: New Member Introductions
Topic: New 66 in Central MA
Replies: 2
Views: 3454

New 66 in Central MA

Hello from Charlie66 A new to us, son and I, Sea Sand 66 Beetle in Central MA. We hope to show up at some of the local shows and meets and enjoy driving around the area on good days. She looks nice but needs minor work on the interior which I hope will bring her back to like new. :) :) Dave and Char...